Cloud Network

Networking | Support | Tricks | Troubleshoot | Tips

Buymecoffe

Buy Me A Coffee
Showing posts with label Cisco CCNA. Show all posts
Showing posts with label Cisco CCNA. Show all posts

Tuesday, October 29, 2019

How to Configure/Backup/Restore Cisco IOS Image in Router and Features

October 29, 2019
How to Configure/Backup/Restore Cisco IOS Image in Router and Features

How to Configure/Backup/Restore Cisco IOS Image in Router Using RAM, NVRAM and TFTP

 

Router Configuration Files are located in one of three places

RAM, (Configuration File stored here)
NVRAM and
External Server (FTP,HTTP,TFTP, SCP)

Saving Configuration Files from RAM to NVRAM

Step1 :- copy running-config|startup-config flash:file_name

Backup your configuration to an external server

Step2 :- copy running-config URL_location
examplge :- copy running-config tftp://192.168.1.10/mybackupfile.txt

Step3 :- copy running-config tftp
If the filename already exists on the server, the server overwrites the old file. After entering this information, you should see bang symbols (!) indicating the successful transfer of UDP segments to the TFTP server. If you see periods (.), this indicates an unsuccessful transfer. Plus, upon a successful transfer, you should also see how many bytes were copied to the server.

Restoring Configuration Files

Step4 :- copy URL_location running-config|startup-config
example :- copy tftp startup-config (TFTP server to NVRAM)
Step4 :- copy tftp running-config  (TFTP server to Active Memory)

Restoring Configuration From NVRAM to RAM with this command

Step5 :- copy startup-config running-config (From NVRAM)
Step5 :- copy flash:file_name running-config|startup-config (From flash)

The copy command backs up and restores configuration files: copy running-config  startup-config and copy running-config tftp back up the configuration file.
The copy startup-config running-config and copy tftp running-config or copy tftp startup-config commands restore the configuration file.
The erase startup-config command deletes the configuration file.

For delete your configuration file

Step6 :- erase startup-config|nvram
or write erase

To verify deleted file

Step7 :- show startup-config

Configuration Nomenclature (IFS) IOS File System

Step8 :- more system:running-config (To view the active configuration)
Step8 :- delete flash:file_name (delete a file in flash)

Overview of IOS Process When Dealing with Configuration Files

To View IOS Image Files

Step9 :- show flash
or dir (additional command)
Step10 :- show version (how much flash you have installed on your IOS device)

Example :- c1841-advipservicesk9-mz.124-6.T7.bin
c1841 refers to the name of the platform on which the image will run.
advipservicesk9 refers to the features included in this IOS version,
mz or z means that the image is compressed and must be uncompressed before loading/running.
124-6.T7 indicates the software version number of the IOS.
and .bin at the end indicates that this is a binary image.

Backing Up an IOS Image

Step11 :- copy flash tftp (tftp is URL)

Loading an IOS Image

Step12 :- copy tftp flash




Reboot your Router in two ways
turn it off and back on, or use the Privilege EXEC reload command.
The first method is a hard reboot, and the second one is a soft reboot.

Caution : If you place an incorrect image on your router—for instance, a 3600 series image on a 2800 series router—the router will not boot up. You’ll need to break into ROMMON mode and either do a TFTP boot or boot from the Mini-IOS in ROM  (if this exists).

Example : copy tftp://192.168.101.66/iosimage.bin flash

Remote Access to Your IOS Device

SSH Configuration
Step13 :- username itcloudnet secret password@123
Step14 :- hostname cloudnetwork
Step15 :- ip domain-name itcloudnet.blogspt.com
Step16 :- ip ssh version 2
Step17 :- line vty 0 15
Step18 :- login local
Step19 :- transport input ssh
Step20 :- exit

Local ARP Table

Step21 :- show ip arp





CDP Configuration

Step22 :- [no] cdp run
Step23 :- interface type (for enable or disable)
Step24 :- [no] cdp
Step25 :- show cdp (cdp status)
Step26 :- show cdp interface
Step27 :- show cdp neighbors
Step28 :- show cdp neighbors detail
Step29 :- show cdp traffic

Using Ping

Step30 :- ping destination_IP_address_or_host_name
or ping (additional command)
example : ping 192.168.1.10

Using Traceroute

Step31 :- traceroute destination_IP_address_or_host_name
or traceroute (extended traceroute command)
example : traceroute 65.32.13.30

Using Telnet





Step32 :- name_of_the_destination | destination_IP_address
or telnet name_of_the_destination | destination_IP_address
or connect name_of_the_destination | destination_IP_address
example : resume connection_# (connection_# should be enter Conn Name of coloum)
disconnect connection_#  (connection_# should be enter Conn Name of coloum)
clear line line_# (If you see a * in the first column, this indicates your current session. If you want to terminate someone’s session, use the Privilege EXEC clear line command)

Debug

Step33 :- no debug all
or undebug all
service timestamps debug datetime msec

SELF TEST

The following Self Test questions will help you measure your understanding of the material presented in this chapter. Read all the choices carefully, as there may be more than one correct answer. Choose all correct answers for each question.

Router Configuration Files
1. Which router commands perform an overwrite process? (choose two)
A. copy running-config startup-config
B. copy startup-config running-config
C. copy tftp running-config
D. copy running-config tftp




2. Enter the router command to delete your configuration file in NVRAM:__________.

3. You have executed the show startup-config command and see the following message: “%%Non-volatile configuration memory is not present”. Which of the following answers are correct about these two things? (choose two)
A. This command displays the running configuration in NVRAM.
B. This command displays the saved configuration in NVRAM.
C. This command displays the saved configuration in flash.
D. The message indicates that flash needs to be reformatted.
E. This message indicates that NVRAM needs to be reformatted.
F. This message indicates that there is nothing stored in this memory location.

IOS Image Files
4. When backing up your IOS image from flash, which of the following will the copy flash tftp command prompt you for? (choose three)
A. TFTP server IP address
B. Verification to copy
C. Source filename
D. Destination filename

5. What IOS command will display the version of software your device is running?
A. show startup-config
B. show flash
C. show version
D. dir and show version




Remote Access to Your IOS Device
6. Enter the IOS configuration on the first five VTYs to allow only SSH access and to prompt for both a username and password for line authentication:___________________.

7. Enter the IOS command that will create RSA public and private keys to encrypt and decrypt traffic for an SSH session:__________.

Basic Troubleshooting
8. Which of the following is true of CDP?
A. The show cdp neighbor command displays what version of software the neighbor is running.
B. The no cdp run command disables CDP on an interface.
C. CDP sends out broadcasts every 60 seconds.
D. CDP can be used to validate layer 2 connectivity.

9. Which router command would you use to test only layer 3 connectivity?
A. telnet
B. show cdp traffic
C. show interfaces
D. traceroute

10. How would you suspend a telnet session?
A. CTRL-SHIFT-X, 6
B. CTRL-SHIFT-6, X
C. CTRL-6, X
D. CTRL-C